2020-04-27 17:30:30 +00:00
# lixonet-ee
2020-04-27 18:13:14 +00:00
This is the semi-official, testing Lixonet EE repository.
2020-04-27 22:18:08 +00:00
Custom configurations should be supplied in a `lixonet.conf` file in the `name=value` format, such as your subnet. Additionally, a tinc keypair is also be required.
2020-04-27 18:13:14 +00:00
2020-04-27 22:18:08 +00:00
**Configuration options**
All options are supplied in the `name=value` format on individual lines, i.e. `name=test_name_lixo`
* `name` - The global, local neighbor name. Tinc and Bird use this to identify a peer in the network.
**Setup**
Given,
1. Docker is installed
2. `eth0` is the **LAN** or **WAN** interface supporting external routing, DNS, etc.
3. `eth1` is the **birdged** interface to a router that will statically route the entire network subnet
Then, on the host:
1. Clone this repository: `git clone`
2. `mkdir /etc/lixonet/` ,
3. fill out `lixonet.conf` (see: **Configuration options** ), supply a `tinc.key` , and run `chmod +x build.sh && ./build.sh` to begin.
