From 67bbdaf9fefc40899fe0e6cdb087f2c406f46ab6 Mon Sep 17 00:00:00 2001 From: sump pump Date: Tue, 9 Jun 2020 16:52:11 +0000 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index d2893d1..de841a3 100644 --- a/README.md +++ b/README.md @@ -144,7 +144,7 @@ For options we expose here, for information see: https://bird.network.cz/?get_do 2. `eth0` is the **LAN** or **WAN** interface supporting external routing, DNS, etc., and is the **bridged** interface to a router that will statically route the entire desired network subnet (i.e. x.x.0.0/21) through it. You may also have an `eth1` (and so on, so forth) that you statically configure for your entire, wide subnet (i.e. x.x.0.0/21) if you want to use two physical adapters. If you do have more than one interface, make sure that `internal_gateway` is set to the router IP address that can route your personal Lixonet subnets, and not your WAN gateway (unless they're the same). 4. `tun` and `tap` are in `/etc/modules` to load at boot (https://www.cyberciti.biz/faq/linux-how-to-load-a-kernel-module-automatically-at-boot-time/) and the system has been rebooted afterwards. 5. `sigil` is installed (`curl -L "https://github.com/gliderlabs/sigil/releases/download/v0.5.0/sigil_0.5.0_$(uname -sm|tr ' ' '_').tgz" | tar -zxC /usr/local/bin`) -6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1` and `iptables -P FORWARD ACCEPT` are run (and persisted) to allow IP forwarding. To persist these changes, see: https://wiki.alpinelinux.org/wiki/Configure_Networking, refer to "Save Firewall Rules". +6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1` #### Install: