From e939cf8f8ed9880d646e556355a6ad45f7fff1d8 Mon Sep 17 00:00:00 2001 From: sump pump Date: Thu, 21 May 2020 05:46:25 +0000 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 397fb8c..8414540 100644 --- a/README.md +++ b/README.md @@ -56,7 +56,7 @@ For options we expose here, for information see: https://bird.network.cz/?get_do 2. `eth0` is the **LAN** or **WAN** interface supporting external routing, DNS, etc., and is the **bridged** interface to a router that will statically route the entire desired network subnet (i.e. x.x.0.0/21) through it. You may also have an `eth1` (and so on, so forth) that you statically configure for your entire, wide subnet (i.e. x.x.0.0/21) if you want to use two physical adapters. 4. `tun` and `tap` are in `/etc/modules` to load at boot (https://www.cyberciti.biz/faq/linux-how-to-load-a-kernel-module-automatically-at-boot-time/) and the system has been rebooted afterwards. 5. `sigil` is installed (`curl -L "https://github.com/gliderlabs/sigil/releases/download/v0.5.0/sigil_0.5.0_$(uname -sm|tr ' ' '_').tgz" | tar -zxC /usr/local/bin`) -6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1` and `iptables -P FORWARD ACCEPT` are run (and persisted) to allow IP forwarding. +6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1` and `iptables -P FORWARD ACCEPT` are run (and persisted) to allow IP forwarding. To persist these changes, see: https://wiki.alpinelinux.org/wiki/Configure_Networking, refer to "Save Firewall Rules". #### Install: