Custom configurations should be supplied in a lixonet.conf file in the name=value format, such as your subnet. Additionally, a tinc keypair is also be required.

Generating keypairs for tinc (tinc.key):

Source: https://www.tinc-vpn.org/documentation/Generating-keypairs.html

Run: tincd -n lixonet -K

Configuration options

All options are supplied in the name=value format on individual lines, i.e. name=test_name_lixo

name - The global, local neighbor name. Tinc and Bird use this to identify a peer in the network.
wan_interface - The interface that Tinc should bind to to listen for incoming connections (i.e. eth1). This is not the tunnel interface.

Setup

Prerequisites:

Docker is installed
eth0 is the LAN or WAN interface supporting external routing, DNS, etc.
eth1 is the birdged interface to a router that will statically route the entire network subnet
tun and tap are in /etc/modules to load at boot (https://www.cyberciti.biz/faq/linux-how-to-load-a-kernel-module-automatically-at-boot-time/)

Install:

Clone this repository: git clone
mkdir /etc/lixonet/
Fill out /etc/lixonet/lixonet.conf (see: Configuration options)
Supply /etc/lixonet/tinc.key
Run chmod +x build.sh && ./build.sh to deploy the stack on Docker.