2020-04-27 17:30:30 +00:00
# lixonet-ee
2020-04-27 18:13:14 +00:00
This is the semi-official, testing Lixonet EE repository.
2020-04-27 22:18:08 +00:00
Custom configurations should be supplied in a `lixonet.conf` file in the `name=value` format, such as your subnet. Additionally, a tinc keypair is also be required.
2020-04-27 18:13:14 +00:00
2020-04-27 22:32:03 +00:00
**Generating keypairs for tinc (`tinc.key` )**:
Source: https://www.tinc-vpn.org/documentation/Generating-keypairs.html
Run: `tincd -n lixonet -K`
2020-04-27 22:18:08 +00:00
**Configuration options**
All options are supplied in the `name=value` format on individual lines, i.e. `name=test_name_lixo`
* `name` - The global, local neighbor name. Tinc and Bird use this to identify a peer in the network.
**Setup**
Given,
1. Docker is installed
2. `eth0` is the **LAN** or **WAN** interface supporting external routing, DNS, etc.
3. `eth1` is the **birdged** interface to a router that will statically route the entire network subnet
Then, on the host:
1. Clone this repository: `git clone`
2020-04-27 22:32:03 +00:00
2. `mkdir /etc/lixonet/`
3. Fill out `/etc/lixonet/lixonet.conf` (see: **Configuration options** )
4. Supply `/etc/lixonet/tinc.key`
5. Run `chmod +x build.sh && ./build.sh` to deploy the stack on Docker.
