Update README.md
This commit is contained in:
parent
f1ff9e8c5d
commit
67bbdaf9fe
@ -144,7 +144,7 @@ For options we expose here, for information see: https://bird.network.cz/?get_do
|
||||
2. `eth0` is the **LAN** or **WAN** interface supporting external routing, DNS, etc., and is the **bridged** interface to a router that will statically route the entire desired network subnet (i.e. x.x.0.0/21) through it. You may also have an `eth1` (and so on, so forth) that you statically configure for your entire, wide subnet (i.e. x.x.0.0/21) if you want to use two physical adapters. If you do have more than one interface, make sure that `internal_gateway` is set to the router IP address that can route your personal Lixonet subnets, and not your WAN gateway (unless they're the same).
|
||||
4. `tun` and `tap` are in `/etc/modules` to load at boot (https://www.cyberciti.biz/faq/linux-how-to-load-a-kernel-module-automatically-at-boot-time/) and the system has been rebooted afterwards.
|
||||
5. `sigil` is installed (`curl -L "https://github.com/gliderlabs/sigil/releases/download/v0.5.0/sigil_0.5.0_$(uname -sm|tr ' ' '_').tgz" | tar -zxC /usr/local/bin`)
|
||||
6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1` and `iptables -P FORWARD ACCEPT` are run (and persisted) to allow IP forwarding. To persist these changes, see: https://wiki.alpinelinux.org/wiki/Configure_Networking, refer to "Save Firewall Rules".
|
||||
6. IPv4 forwarding is on: `sysctl -w net.ipv4.ip_forward=1`
|
||||
|
||||
#### Install:
|
||||
|
||||
|
Loading…
x
Reference in New Issue
Block a user